What Happens If The Brake Light Is Always On And Can’t Be Turned Off?
If the brake light keeps on, it may be that the brake system is faulty. You should check and eliminate the brake system failure. The reasons why the brake light keeps on are as follows:
- The brake fluid level is too low
First determine whether the handbrake is fully released, and then open the engine compartment cover. The brake fluid pot is usually located on the right side of the engine compartment, and there are MAX (highest position) and MIN (lowest position) signs on the outside. If it is below MIN, you need to go to the repair shop as soon as possible Check to add.
1 What is the situation that the brake light is always on and cannot be turned off? - Brake fluid leakage
Oil leakage in the brake cylinder, oil pipe, etc. will also cause the brake fluid level in the brake fluid pot to be too low and cause an alarm. In such cases, the leaking area should be checked immediately and repaired and replaced. In addition, if there are oil stains on the brake pads, they must be cleaned up or replaced directly.
1 What is the situation that the brake light is always on and cannot be turned off? - Brake wear alarm
When the brake pads are worn to the limit, the brake system will trigger an alarm. The brake pad alarm system is to insert the alarm line into the brake pad. If the brake pad wears too much, it will rub the sensing line, causing the sensing line to wear off or grounding with the brake disc, resulting in a change in resistance, resulting in a change in current, and finally Call the police.
